Les Paul Special-II GT | Neck and Fretboard
According to the Guitar Dater Project, this Epiphone Les Paul Special-II GT [Serial Number 11032309981] was made in Indonesia in March 2011. It has been in storage for years, and is far from gig-worthy. And as luck would have it, I forgot to snap pics of the guitar before taking it apart. A thousand apologies, folks. All right, then. We'll start off with a close look at the neck and fretboard.
- Neck Material: Hard Maple
- Neck Construction: Bolt-On
- Neck Finish: Trans Black
- Profile: Slim Taper
- Scale Length: 24-3/4"
- Fretboard Material: Rosewood
- Thickness of Fretboard: 7.02 mm
- Fretboard Radius: 14"
- Fret Count: 22
- Fret Size: Medium Jumbo
- Nut Width 43.37 mm
- Thickness at 1st Fret: 20.83 mm
- Width at 7th Fret: 49.39 mm
- Thickness at 7th Fret: 21.43 mm
- Width at 12th Fret: 52.43 mm
- Thickness at 12th Fret: 22.35 mm
- Width at 22nd Fret: 57.37 mm
- Fretboard Inlays: Pearloid Parallelogram
- Hardware Finish: Black
- Tuning Machines: Trapezoid, 14:1 Gear Ratio
- Truss Rod: Adjustable, 5/32" Hex Wrench
- Truss Rod Cover: Two-Ply Black/White, GT Logo
 |
| Hard Maple Bolt-On Neck |
 |
| Trans Black Finish |
 |
| Trapezoid Tuning Machines |
 |
| Serial Number 11032309981 |
 |
| Neck Heel Label |
 |
| 22 Medium Jumbo Frets |
 |
| Headstock Labels |
 |
| GT Truss Rod Cover |
 |
| Truss Rod Adjustment Socket |
 |
| 5/32" Truss Rod Wrench |
 |
| Rosewood Fretboard |
 |
| Fretboard Extension |
 |
| 14" Fretboard Radius |
 |
| Pearloid Parallelogram Inlays |
 |
| White Side Dots |
No comments:
Post a Comment
Thank you for dropping by. All comments are highly appreciated.