Preamble
Now that the made-in-Mexico Standard Series has been phased out, Fender's introduced the "Player Series" (also MIM). For today's post, we'll take a look at a Polar White Fender Player Telecaster with a Pau Ferro fretboard (#0145213515). It's come in for a switch to 10s and setup. Before we take a look at some specs (courtesy of Fender and Swee Lee); do check out this Dawsons Music YouTube Review of a similar Fender Player Series Telecaster PF (albeit in 3-Color-Sunburst).
Body
Body Material: Alder
Body Color: Polar White
Body Finish: Gloss Polyester
Body Shape: Telecaster®
Neck
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern "C"
Scale Length: 25.5" (648 mm)
Fretboard Material: Pau Ferro
Fretboard Radius: 9.5" (241 mm)
Frets: 22 Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.650" (42 mm)
Position Inlays: White Dot
Truss Rod: Standard Truss Rod Nut, 3/16" Hex Adjustment
Electronics
Bridge Pickup: Player Series Alnico 5 Tele® Single-Coil
Neck Pickup: Player Series Alnico 5 Tele Single-Coil
Controls: CTS 250K Master Volume, CTS 250K Master Tone
Tone Capacitor: 0.02uF/Ceramic
Selector Switch: Oak Grigsby Three-Position Blade
Output Jack: Generic Mono Open Frame
Jack Mounting: Metal Retainer Clip/Recessed Metal Cup
Shielding: Conductive Shielding Paint
Hardware
Bridge: Six-Saddle String-Through-Body Tele® with Block Steel Saddles
Hardware Finish: Nickel/Chrome
Tuning Machines: Standard Cast/Sealed
Pickguard: Three-Ply Parchment
Control Knobs: Knurled Flat-Top
Switch Tip: Barrel Style
Neck Plate: Four-Bolt "F" Stamped
Now that the made-in-Mexico Standard Series has been phased out, Fender's introduced the "Player Series" (also MIM). For today's post, we'll take a look at a Polar White Fender Player Telecaster with a Pau Ferro fretboard (#0145213515). It's come in for a switch to 10s and setup. Before we take a look at some specs (courtesy of Fender and Swee Lee); do check out this Dawsons Music YouTube Review of a similar Fender Player Series Telecaster PF (albeit in 3-Color-Sunburst).
Body
Body Material: Alder
Body Color: Polar White
Body Finish: Gloss Polyester
Body Shape: Telecaster®
Neck
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern "C"
Scale Length: 25.5" (648 mm)
Fretboard Material: Pau Ferro
Fretboard Radius: 9.5" (241 mm)
Frets: 22 Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.650" (42 mm)
Position Inlays: White Dot
Truss Rod: Standard Truss Rod Nut, 3/16" Hex Adjustment
Electronics
Bridge Pickup: Player Series Alnico 5 Tele® Single-Coil
Neck Pickup: Player Series Alnico 5 Tele Single-Coil
Controls: CTS 250K Master Volume, CTS 250K Master Tone
Tone Capacitor: 0.02uF/Ceramic
Selector Switch: Oak Grigsby Three-Position Blade
Output Jack: Generic Mono Open Frame
Jack Mounting: Metal Retainer Clip/Recessed Metal Cup
Shielding: Conductive Shielding Paint
Hardware
Bridge: Six-Saddle String-Through-Body Tele® with Block Steel Saddles
Hardware Finish: Nickel/Chrome
Tuning Machines: Standard Cast/Sealed
Pickguard: Three-Ply Parchment
Control Knobs: Knurled Flat-Top
Switch Tip: Barrel Style
Neck Plate: Four-Bolt "F" Stamped
 |
 |
 |
|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
No comments:
Post a Comment
Thank you for dropping by. All comments are highly appreciated.