Showing posts with label stringthroughbody. Show all posts
Showing posts with label stringthroughbody. Show all posts

Sunday, May 03, 2020

LTD B-155DX Electric Bass Gets Deactivated

Before I talk about work done on this stunning 5-string bass, let's take a look at some stock specs, courtesy of Guitar Center.

Construction: Bolt-on
Body: Basswood/flamed maple top
Neck: Maple/'thin U' profile
Fretboard: Rosewood/34" scale/dot inlays/24 extra-jumbo frets
Hardware: Black Nickel/ESP tuners/ESP DB-5 Bridge (string-thru-body)
Pickups: ESP SB-4 (Neck/Bridge)
Preamp: ESP ABQ-3 3-Band Active EQ
Shielding: Conductive paint/Aluminium foil

I was quite impressed with the looks and sturdiness of this bass when I first laid eyes upon it, I must say. However, the electronics were another story. The owner, a soft-spoken Kemaman chap, was totally frustrated because his pride and joy was emitting all kinds of weird noises whenever he tried to play it. This had happened onstage many a time, much to his embarrassment.

After a thorough checkup, I realized that the preamp was toast and had to be replaced. But as that would cost a bomb, we decided to go with a cheaper alternative: dump the active electronics and rewire the bass as a passive instrument.

And so the bass was rewired with a 3-way toggle switch, master volume; and master tone. I was able to reuse the stock master volume pot, but needed to add an Alpha 500K pot; and replace the flimsy stock plastic-bodied stereo jack with a Neutrik/Rean NYS229.

All well and good, except that we now had two unsightly holes where the mid and bass EQ pots used to be. I offered to plug the holes with wooden dowels and stain them to match the finish as best I could, but the owner did not go for it. Instead, he suggested a 'dummy' pot/control knob setup matching the stock control configuration.Fair enough, I thought; and so two of the stock EQ pots were wired in with all six tabs wired to ground (ie shorted out).

It was a rainy evening when I tested this 'deactivated' bass and called it good. And guess what? Out of the blue, I got a call from the owner asking me if his pride and joy was ready; as he had a gig at 8pm. It was still drizzling when he came to pick up his bass, grinning from ear to ear. Somehow, I knew he'd be having a real hot gig that night.







Monday, July 28, 2014

2007 Left-Handed American Standard Precision Bass

This blog entry features a left-handed black 2007 American Standard Precision Bass that came in for a string change (DR Dragon Skin) and setup. Besides this, the owner also requested that the stock Custom Shop '60s Split Single-Coil Precision Bass pickup be replaced with a Seymour Duncan SPB-4 Steve Harris. 

Features that caught my eye were the ultra-smooth and precise Fender "F" Light-Weight Vintage-Paddle Keys with Tapered Shafts (tuning machines), the 4-Saddle High-Mass Vintage String-Through-Body Bridge (adjustable string spacing), and solid shaft CTS pots. On the other hand, I was rather disappointed to see that the 0.05uF tone cap was ceramic.



Full front and rear view.

Headstock front and back.

String ferrules for through-body stringing.



Closer view of the "4-Saddle High-Mass Vintage String-Through-Body" bridge. Note that the saddles for the G and D strings have 4 grooves, and those for the A and E, three. This feature enables adjustable string spacing.





Clockwise from top left: pickguard sticker, volume control knob removed to reveal solid pot shaft, truss rod adjustment hex nut at neck heel, and pickguard assembly date sticker.




Underside of pickguard shielded with aluminium foil, and control cavity with shielding paint. Note ground lug to the left of the barcode sticker.


Closer view of the electronics.

Good to go.