After dealing with frozen screws, nuts, and the like, we've finally disassembled this bass. On the electronics front, a full rewire is on the cards, with only the pickups retained. As for hardware, we'll be retaining whatever is reusable after servicing, and replacing what's not. CA Guitar Repair. Taman Impian Ku, 25200 Kuantan.
 |
| GSR200 Control Cavity |
 |
| 9V Battery Compartment |
 |
| Disassembly in Progress |
 |
| Empty Control Cavity - Note Shielding Paint |
 |
| Empty 9V Battery Compartment |
 |
| Control Cavity Electronics |
 |
| Pot Nuts, Flat and Lock Washers |
 |
| B500K Neck Volume Pot |
 |
| B500K Bridge Volume Pot |
 |
| A500K Master Tone Pot |
 |
| Phat II EQ PCB and B20K Bass Boost Pot |
 |
| Output Jack Solder Joints |
 |
| Neck Joint Sans Hardware |
 |
| Neck Screws and Ferrules |
 |
| Strap Buttons, Washers and Screws |
 |
| Truss Rod Adjustment Nut |
 |
| Die-Cast Machine Heads |
 |
| Fretboard and Frets |
 |
| Neck Heel |
 |
| Bridge Mounting Screws, Saddles Disassembled |
 |
| Bridge Plate Is Stuck Fast to the Body |
 |
| Bridge Ground - Broken Connection |
No comments:
Post a Comment
Thank you for dropping by. All comments are highly appreciated.