◀ Part 1
Installing an Onboard Preamp
The owner of this gloss black Fender Classic Design Series CD-60S Dreadnought wants an onboard preamp installed, and has provided me with a KAILG EAC-4SC. Well then, come join me on a brief walk-through of the installation process.
 |
| KAILG EAC-4SC Four Band Preamp |
 |
| Location determined and outlines drawn |
 |
| Pilot holes drilled in the corners |
 |
| Pilot holes redrilled with a larger bit |
 |
| Preamp cavity cut with a rotary tool |
 |
| Squaring edges with a rasp and files |
 |
| Test-fitting the preamp |
 |
| Preamp installed |
 |
| Hole drilled for piezo pickup cable |
 |
| Pilot hole for output jack drilled |
 |
| Pilot hole redrilled with a larger bit |
 |
| Output jack hole widened further with a reamer |
 |
| Output jack installed |
No comments:
Post a Comment
Thank you for dropping by. All comments are highly appreciated.