First introduced in July 1976, the Yamaha SG-2000 represents, in my humble opinion; the epitome of Japanese solidbody guitar craftsmanship. It's no wonder then, that in its 1978 catalog, Yamaha describes the SG-2000 as being targeted towards "those who demand the very finest in both feel and sound." That being said, let's take a look at some of this guitar's distinguishing features.
Body
Three-piece mahogany/maple/mahogany laminated neck-through design
Fretboard
Bound black mahogany (not ebony), 22 frets, 24.75" scale length, 13" radius, mother-of-pearl "split-wing" inlays
Headstock
Five-ply binding, "double-dipped shape," block lettering logo, three-piece floral inlay.
Hardware
The tobacco brown SG-2000 featured today was in particularly bad shape when sent to me; most probably due to prolonged neglect and (I suspect) abuse. Grime, rust, crud, tarnish, dings and dents was the order of the day here. On the plus side, I noted that the guitar had been recently been refretted and fitted with a bone nut. The electronics were a tad noisy, but this was soon cured with a few squirts of electrical contact cleaner.
Perhaps the toughest task I had to deal with was removing as much rust, crud and grime from the gold-plated hardware without taking off too much metal. Thankfully, I managed to accomplish this via electrolysis. Then there was the black mahogany fretboard, suffering from years of solidified sweat and grime caking the wood in between the badly tarnished frets. It took lots of careful scraping, lighter fluid, lemon oil, 0000 steel wool and Autosol to get the job done; but the results were worth it.
After reinstalling the hardware, this baby was given an all-round wax and polish, strung up with 10s, and plugged into an amp for a final check. Boy, did it sing!
References
Premier Guitar
Yamaha Musicians Forum
Vintage Yamaha Guitars
Vintage Guitar Magazine
Body
- Five-ply binding
- Carved, "mildly figured" three-piece maple top
- "T-Cross maple and mahogany construction:" laminated maple and mahogany body, with the grain of the center section "set perpendicular" to the sides
- Contoured back, top waist "scoop"
- Deep double cutaways
Three-piece mahogany/maple/mahogany laminated neck-through design
Fretboard
Bound black mahogany (not ebony), 22 frets, 24.75" scale length, 13" radius, mother-of-pearl "split-wing" inlays
Headstock
Five-ply binding, "double-dipped shape," block lettering logo, three-piece floral inlay.
Hardware
- Gold-plated
- Fully adjustable bridge rests on two thumbwheels that screw into a recessed solid brass sustain block/plate
- Tailpiece features a "harp and scroll" motif
- "Precise torque" tuning machines (15:1 ratio) with "kidney shaped" knobs
- Two volume pots, two tone pots (no push-pull coil split function), 3-way toggle switch
- Pickup, switch and control cavities fully shielded with shielding paint
- Two "powerful open-type" Alnico V humbuckers with "individually adjustable polepieces." Three machine screws allow for pickup height and alignment adjustments ("tri-mounting")
The tobacco brown SG-2000 featured today was in particularly bad shape when sent to me; most probably due to prolonged neglect and (I suspect) abuse. Grime, rust, crud, tarnish, dings and dents was the order of the day here. On the plus side, I noted that the guitar had been recently been refretted and fitted with a bone nut. The electronics were a tad noisy, but this was soon cured with a few squirts of electrical contact cleaner.
Perhaps the toughest task I had to deal with was removing as much rust, crud and grime from the gold-plated hardware without taking off too much metal. Thankfully, I managed to accomplish this via electrolysis. Then there was the black mahogany fretboard, suffering from years of solidified sweat and grime caking the wood in between the badly tarnished frets. It took lots of careful scraping, lighter fluid, lemon oil, 0000 steel wool and Autosol to get the job done; but the results were worth it.
After reinstalling the hardware, this baby was given an all-round wax and polish, strung up with 10s, and plugged into an amp for a final check. Boy, did it sing!
References
Premier Guitar
Yamaha Musicians Forum
Vintage Yamaha Guitars
Vintage Guitar Magazine
 |
 |
 |
|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
I have a Yamaha SF 1000 guitar. Few days ago I when my guitar trogle switch broke I Installed another new trogle switch but After that my guitar sound changed a lot Low sound decreased,guitar sound changed,tone depth is not the same as before.Tone depth changes a lot. Sir can you please help me With this?Thank you..
ReplyDeleteSorry for the late reply. You need to recheck your wiring. Also use only the highest quality toggle switch you can afford. I would recommend a Switchcraft.
Delete